The digitally controlled line arrays Ascolto® are equipped with high-quality 3,5” neodymium loudspeakers, capable to spread perfectly voice as well as sound instruments.
They can handle higher power applications, delivering great tone at any volume levels. Each Ascolto® digital line array contains a set of custom-designed, fully-programmable 135-MHz, 48-bit DSPs where high precision 76-bit accumulators ensure the bit resolution for a total quality in digital audio processing such as beam filtering and audio equalization.
The Ascolto AH0835 is unique for its acoustic directivity, extremely selective and capable of reaching deep space. The Ascolto AH1635 is particularly suitable to ensure an extended coverage in large environments, where it needs simultaneously a very incisive beam and a bright tone.
enhances the quality of the sound;
improves environment with acoustically difficult characteristics;
focuses the sound energy directly to the public, minimizing the effects of the sound
reflections of the ceiling and the side walls;
fulfills all aesthetic and architectural requirements;
distributes capably audio in cathedrals, churches, mosques, theaters, auditoriums, airports, railway stations and in general everywhere it is necessary acoustic precision and reliability.
The digitally controlled line arrays Ascolto® are equipped with high-quality neodymium loudspeakers, capable to spread perfectly voice as well as sound instruments. They can handle higher power applications, delivering great tone at any volume levels.
Each Ascolto® digital line array contains a set of custom-designed, fully-programmable 135-MHz, 48-bit DSPs where high precision 76-bit accumulators ensure the bit resolution for a total quality in digital audio processing such as beam filtering and audio equalization.
The Ascolto AH0835 possesses the innovative Anti Reverberation System ARS®, capable of increasing the voice intelligibility in reverberant environments. ARS conveys uniformly acoustic energy on the lower part of the audio beam and reduce drastically the audio emission upwards, attenuating significantly the acoustic reflections related to ceilings.
AVE Line Array User Control® is a sophisticated software application that uses a complex proprietary algorithm to calculate accurately SPL distribution of Ascolto® Digital Line Arrays from their EASE® models. It allows the user to select the appropriate dispersion pattern and transfer aiming and filtering parameters to the digital line array through the dedicated network.
The AVE IRC Infrared Remote Control lets you control the configuration settings even if a host computer is not available.
The AH0835 ist optionally available with Dante card. Thus the AH0835 can be integrated in an existing speaker system or in a Dante network.
|Frequency Bandwidth||80 Hz – 20 kHz (±3 dB)|
|max. SPL (Nominal/Peak)||100 dB/103 dB (A-Weighted at 10 m)
97 dB/100 db (A-Weighted at 20 m)
95 db/98 dB (A-Weighted at 30 m)
|Coverage horizontal (fixed)||130°|
|Coverage vertical (adjustable)||Tilting Angle: –60° to 60°
Opening Angle: 26° to 40°
|Typical Throw||15 m|
|Maximum Throw||25 m|
|Dynamic Range||102 dB|
|Transducers||8 x 3.5“ Full Range Neodym|
|Sensitivity 1W/1 m||88.7 dB|
|Audio Input 1||Line|
|Input Level Nominal||0 dBu (2.19 Vpp)|
|Input Level Maximum||10 dBu (6.92 Vpp)|
|Impedance||20 kOHm at 1 kHz|
|Audio Input 2||100 V|
|Input Level Nominal||39.2 dBu (200 Vpp)|
|Type||Balanced with Transformer|
|Impedance||20 kOhm at 1 kHz|
|Type||PWM (Class D)|
|Output Power||8 x 35 Wrms (8 Ohm)|
|THD+N||0,07% at 10 Wrms/channel|
|Channel protections||Thermal Shutdown (>150°C)
Output Short Circuit
|DSP Processor||48 bit Fixed Point DSP
76 bit internal Accumulator
|Sample Rate||48 kHz|
|A/D Conversion||Resolution: 24 bit linear PCM
Conversion: 1 bit delta-sigma 256x
Sample: 48 kHz
SNR: 102 dB (A-Weighted)
|D/A Conversion||Resolution: 24 bit linear PCM
Conversion: upsampling 128x
Sample rate: 48 kHz
SNR: 105 dB (A-Weighted)
|Signal Processing||Beam Forming Filtering
Input Equalization (10 Biquad)
Volume: (-120 dBFS bis 0 dBFS)
Delay (0 m to 30 m, Step 0,1 m)
Dynamic Compressor 2-Bands
Input Signal Activity Detector
|Processor||32 bit ARM-Cortex M3
|Network Interface||RS485. Full Duplex, 115200 bauds/s|
|Processor Activities||DSP Booting
PWM Power AmplifierControling
PWM Power Amplifier Monitoring
Remote Input Channel Controling
Auto Stand-By Controling
Panel LEDs Controlling
|AC Range||90 VAC to 264 VAC (Universal Input)|
|Input Frequency||47 Hz to 67 Hz|
|Efficiency||90 % at 230 VAC|
|Input Current||2 A at115 VAC
1 A at 230 VAC
|Power Consumption||Continuous: 198 VA
Idle: 12 VA
Stand-By: 4 VA
|Cabinet||Powder Coated Aluminium Extrusion|
|Special colour||available for an additional charge|
|Temperature Range||0°C to 40°C (32°F to 102°F)|
|Protection class||IP 54|